> For the complete documentation index, see [llms.txt](https://docs.nighty.one/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.nighty.one/guides-and-tutorials/discord-mfa-setup/password-only.md).

# Password Only

Use this if you sign in to Discord with just a password (no authenticator app).

{% stepper %}
{% step %}

## Open the Modules tab

In Nighty, open the **Modules** tab.

<div align="left"><figure><img src="https://3836407116-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FaFce5BqRsGvQObqcfG7q%2Fuploads%2FgM7j9Vh6Y32ylyKrGczk%2Fimage.png?alt=media&amp;token=d5f3c7b4-46ea-4c84-b302-3b48edf2c7ba" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}

## Open Multi Factor Authentication

Click **Multi Factor Authentication (MFA)**.

<div align="left"><figure><img src="https://3836407116-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FaFce5BqRsGvQObqcfG7q%2Fuploads%2FARd8S68GkJU1l4js6Vm5%2Fimage.png?alt=media&amp;token=25da54a3-8e14-4972-8775-96d789aef1b9" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}

## Start configuration

Click **Start Configuration**.

<figure><img src="https://3836407116-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FaFce5BqRsGvQObqcfG7q%2Fuploads%2FKyIyfHcMoFKkOJ2qkQlQ%2Fimage.png?alt=media&amp;token=90f80ea5-215e-4baa-8a13-def7a3e9f3c4" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

## Enter your Discord password

Type in your **Discord password**.

{% hint style="warning" %}
Type it carefully. Nighty does **not** check whether it's correct, so a typo here will cause problems later.
{% endhint %}

<figure><img src="https://3836407116-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FaFce5BqRsGvQObqcfG7q%2Fuploads%2FGL7RPsQ6FzLJSQEdmL9E%2Fimage.png?alt=media&amp;token=91db6283-bcaa-4b8e-a3c8-c45379cfdc33" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

## Finish

Click **Finish**.&#x20;

<div align="left"><figure><img src="https://3836407116-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FaFce5BqRsGvQObqcfG7q%2Fuploads%2FPXB8B1xXIgYP8Jf1dN8k%2Fimage.png?alt=media&amp;token=cb757a19-976d-44b1-a930-f730ca968fdc" alt=""><figcaption></figcaption></figure></div>

You should see **Status - Configured**. You're done!
{% endstep %}
{% endstepper %}

{% hint style="info" %}
**Do you see a "Next" button instead of "Finish"?**

If Nighty asks you to enter a 2FA code, that means you have 2FA enabled on your account. Stop here and follow the [**2FA Setup**](/guides-and-tutorials/discord-mfa-setup/password-+-2fa-authenticator-app.md) section below instead.
{% endhint %}